Size (HxWxD) 8.7 x 10.6 x 4.7 in. (221 x 271 x 120 mm.)
Weight (including one battery) 10 lb. (4.5 kg)
Multi-touch Display 10.4 in. wide, 1024 x 768 pixels
Air Intake No
Battery Operation Yes
Phased Array Connector ZPAC or IPEX
Phased Array Channels 16/64 or 16/128
UT Channels 1 P/E or 1 P/C
Amplitude Resolution 16 bits
Measurement Gates 4 + 1 synchronization gate
Data Interfaces Ethernet 1000 Base-T, 1x USB 3.0, 2 x USB 2.0
Maximum PRF 12 kHZ
Data Compression 1, 2, 4, 8, 16
Max. Pulser Voltage (Open Circuit) 105v PA UT/ 215v UT
Max. Applied Voltage (50 ohms) 75v PA UT / 200v UT
Bandwidth (-3 dB) from 0.5 to 18 MHz
Rectification Digital
Filtering Analog/Digital (FIR)
Smoothing (Video Filter) Digital
Self-Check Yes
Automated Probe Detection Yes (with Zetec probe ID chip)
Automated Scanner Detection Yes (with Zetec ID chip)
Focal Laws 256
Maximum Number of Samples 8,192
Maximum Data File Size 300MB for 16/64 version, 700MB for 16/128 version
Encoder Interfaces 2 quadrature-type
PC Software Control UltraVision Touch embedded
Serves as Protection Key License for UltraVision Touch
Data Acquisition and Analysis (for remote data acquisition or off-line postprocessing) UltraVision Touch, UltraVision 3
Embedded Hard Drive 256GB SSD
Video Output HDMI
Instrument Calibration Compliant with ISO 18563-1 / EN 12668-1
Voltage 100 to 240 VAC
Frequency 50 or 60Hz
Maximum Power 100 VA
Operating Temperature Range 14F to 113F (-10C to 45C), with external fan kit: up to 127F (53C)
Storage Temperature Range -40F to 158F (-40C to 70C)
Relative Humidity 80% non-condensing
Ingress Protection Rating Designed for IP66