|
|
|
What's New:
|
Leading the pack.
Zetec’s MIZ-80iD combines the industry’s leading eddy current instrument, probe driver, power supply and MRPC® controller into one modular solution. To find out more,
click here.
|
|
|
|
|
|
|
Z-Scan UT
Zetec's Z-Scan UT is a powerful, flexible, and compact multichannel conventional UT acquisition system. The Z-Scan UT features real-time data compression and signal averaging. This acquisition system interfaces with Zetec scanners and is driven by UltraVision UT software for excellent data acquisition and analysis capabilities.
|
Key Features:
Setup, data acquisition, and data analysis from standard PC
Includes Zetec's UltraVision software for setup and data acquisition
(license for data analysis sold separately)
8 standard ultrasound channels with linear and logarithmic amplifiers
Real-time data compression
High pulsing rate and data throughput
Flexible interfaces to scanners and manipulators
Sealed enclosure is easier to use and maintain in contaminated areas
Specifications
Size (H x W x D):
|
11.8 x 8.7 x 17.7 inches, (30 x 22 x 45 cm)
|
Weight:
|
26.0 lb (12 kg)
|
Environment:
|
Operating temperature: 41ºF to 113ºF (5ºC to 45ºC)
Storage temperature: -4ºF to 140ºF (-20ºC to 60ºC)
Relative humidity: 95%, non-condensing
|
System:
|
Preheating period: 15 minutes
Ethernet interface: 100BaseT (bandwidth of 100 Mbits/s)
Ethernet cable length: Maximum 328 ft (100 m)
|
Power Supply:
|
Voltage: 120 VAC or 230 VAC
Frequency: 50 Hz to 60 Hz
Maximum power: 250 VA, Fuse 250 V, slow blow: 2.5 A at 230 V, 5 A at 120 V
|
Real-time data compression:
|
Yes
|
Real-time averaging:
|
1, 2, 4, 8, and 16
|
Data Transfer:
|
4800 12-bit A-scan/s or 9600 8-bit A-scan/s for a single acquisition card
|
Encoder interfaces:
|
2 quadrature-type: Each encoder interface configures as either quadrature-type, up/down counters, or clock/direction type.
A total of 6 encoders can be permanently connected to the system. 3 encoders can be active simultaneously (in this case, the information of the 3rd is stored in the data file and accessed using specific application-related software.
|
|
The CE mark approves the conformity with all applicable directives and standards of the European community: electrical safety (EN61010-1, EMC (EN61326). The Z-Scan UT is an instrument of Class 1 and installation category II.
|
Instrument Purchase Includes:
Online Data Acquisition Software
Carrying Case
Certification
Operating Guide
Additional Information & Purchase:
Z-Scan UT Data Sheet
Email us for current pricing and ordering information.
<< Full product listing
|
|
|
|